- Do you need a tune after a cam?
- What is a popcorn tune?
- Is a cam bad for your car?
- What is a ghost cam?
- What do cam numbers mean?
- How do I get Bama tunes?
- What does a bad cam sound like?
- What causes cam lope?
- What gives a cam a rough idle?
- What is a Stage 3 cam?
- Does a cam add horsepower?
- Is a ghost cam tune bad?
- Is a popcorn tune bad for your car?
- Is a camshaft expensive to fix?
Do you need a tune after a cam?
We picked up quite a bit of horsepower and torque just from custom tuning the engine with the stock cam, so yes, tuning is very necessary if you want to maximize your new cam’s potential..
What is a popcorn tune?
Popcorn tune is somewhat adjustment of spark Delicious Tuning – Pops & Bangs Map adds all the good sounds when you want them.
Is a cam bad for your car?
Worn cam lobes won’t open the valves as much as intended, leading to poor engine performance and cylinder misfiring. … In pushrod engines, a broken camshaft could significantly damage connecting rods, cylinder block, pistons, or the crankshaft.
What is a ghost cam?
The ghost cam tunes just tighten the overlap between the intake and exhaust cams at idle to give the lumpy camshaft sound.
What do cam numbers mean?
Duration is how long the valve is off its seat. It is listed in degrees of crankshaft rotation. When someone refers to a “big cam,” they mean it has longer duration, not higher Lift. … Advertised Duration is the degrees of crankshaft rotation that the lifter is raised more than a predetermined amount.
How do I get Bama tunes?
Head on over to Americanmuscle.com and search for Free Tunes for Life for your specific vehicle. Simply place an order and you will be sent a link to fill out the tune info sheet. Once we receive the new tune info you will receive your free tunes in 3-5 business days.
What does a bad cam sound like?
Signs of a bad camshaft Here are some of the symptoms of a bad camshaft: Backfiring and popping. A cylinder misfire at low and very high RPMs. A loud tapping noise coming from the valves.
What causes cam lope?
busfran) Lope is a result of the intake and exhaust valves both being open at the same time. Mild cams have little or no overlap at any valve opening that makes a difference. … Hotter aftermarket type cams have a lot because it aids high RPM breathing.
What gives a cam a rough idle?
cam controls the valve action and timing. … The overlap of the exhaust valve closing and intake valve opening causes the engine to be inefficient at low speed which results in the lumpy idle. The closer the Lobe Seperation Angle the more the overlap, the more duration the more (typically) the overlap.
What is a Stage 3 cam?
The LS1 Stage 3 camshaft was designed for enthusiast who want to increase power while maintaining excellent drivability and manners. This cams can be used with stock torque converters, stock rear gears, stock intake manifold, stock exhaust manifolds etc.
Does a cam add horsepower?
Performance cams increase the duration and timing of the valve openings during the engine stroke, increasing horsepower and making your car accelerate more quickly. You’ll idle slightly rougher with a performance cam, but get a throaty rumble that’s desirable for some gearheads, depending on your vehicle.
Is a ghost cam tune bad?
There’s nothing wrong with a ghost cam tune, plenty of people running it with no problems. Unless you’re auto, then it’s probably not a good idea due to the effect it has on drivability.
Is a popcorn tune bad for your car?
This certainly isn’t something they’d recommend on a typical engine, and would cause really high EGTs during the ‘crackle’ period. It, therefore, has more potential for damage to be caused.
Is a camshaft expensive to fix?
Camshaft Repair Cost – How Much Will I Have To Pay? The average price of replacing a camshaft position sensor and the typical camshaft repair cost comes to between $120 and $300 on average. … There can be additional fees and taxes added onto the labor costs, along with the local car dealership camshaft repair cost.